Effective training on safety operation procedures can enhance employees' safety awareness and skill levels, providing a guarantee for the sustainable development of enterprises. Correct operation of the
Cnc Crescent Groove Milling Machine can reduce repetitive work and repair time, and improve production efficiency.
Basic precautions for safe operation
Personal protection: Wear work clothes, safety shoes, work caps and protective glasses when working. Put on labor protection supplies before starting work. However, do not wear gloves during operation to avoid getting caught in moving parts and causing danger.
Equipment identification: Do not move or damage the warning signs installed on the machine tool. These signs contain important safety tips and operation instructions.
Workspace: Be careful not to place obstacles around the machine tool. Keep the workspace large enough to ensure smooth movement during operation and avoid collisions.
Multi-person collaboration: When a certain task requires the joint efforts of two or more people, it is important to pay attention to mutual coordination and consistency to avoid accidents caused by poor communication.
Equipment cleaning: Compressed air is not allowed to be used to clean machine tools, electrical cabinets and NC units to prevent dust and debris from entering the equipment and causing malfunctions.
Equipment inspection before work
Power supply and voltage: Check if the power supply is normal and the voltage is stable to ensure that the equipment operates under an appropriate power environment.
Machine tool components: Check whether all components of the machine tool are in good condition and whether there is any loosening or damage, such as guide rails, lead screws, etc.
Tool installation: The tools should be in accordance with the specifications allowed by the machine tool. The installation must be correct. Check for any looseness or damage. Tools with severe damage should be replaced in a timely manner. Do not leave the tools used for adjusting the cutting tools in the machine tool. After the cutting tools are installed, one or two trial cuts should be conducted
